Delivery Brush - Lifting beams 95 tons
Lifting beams for handling generators
For BRUSH SEM, s.r.o. based on their requirements, we produced a traverse for handling generators, including a storage stand. This resulted in a traverse with a load capacity of 95 tons, with a maximum span of 4,650 mm and an own weight of 7.2 tons. During the test mode, difficulties were discovered in hanging the traverse on the double hook of the crane. Through mutual communication with the customer, a solution to this problem was found in modifying the suspension method. A four-strand textile harness was added to the crossbar, resulting in greater suspension stability. After additional adjustment of the traverse, the traverse was again sent to the customer and a new suspension test was performed. Now everything was proceeding according to the customer's expectations, and the traverse was found to meet the customer's requirements.
| TECHNICAL DATA | ||
| TypE JTN 95/4,65/3,35/3,75-2,8 | ||
| Capacity (WLL) | Q(t) |
95 |
| Span MAX. | L2(mm) | 4650 |
| Span MIN. | L1(mm) | 3350 |
| Wheelbase MAX. | B2(mm) | 3750 |
| Wheelbase MIN. | B1(mm) | 2800 |
| Overhead Dimension | t(mm) | 585 |
| Pin Diameter | D(mm) | 130 |
| Weight | G(kg) | 7200 |
